Right-click on Setup.exe (or NCStudio.exe installer) and select . Navigate to the Compatibility tab.
To ensure stable performance, your computer should meet at least these specifications:
Windows XP, 7, 8, 10, 11 (32-bit native, 64-bit via virtualization/patched drivers)
Weihong NcStudio CNC Machine Vision Controller V5. 5.60 ENGLISH support functions of Advance Start, Breakpoint Resume, MPG Wizard, NC Studio EXPLAINER installing + tips and tricks control ncstudio v55601 english setup 64 bit
: Double-click setup.exe and select "Run as administrator" .
Once launched, you must configure the software to safely match your CNC machine’s physical parameters. Press (or double-click the parameter boxes) to unlock advanced manufacturer settings. Critical Parameter Checklist Parameter Name Description Common Default Value Motor Steps/mm Pulse equivalent for X, Y, and Z axes. Calculated per lead screw pitch Travel Limits Maximum physical workspace dimensions. Machine specific (e.g., 600x900mm) Feed Rate Maximum safe rapid transit speed (G00). 3000 – 5000 mm/min Z-Axis Direction Ensures positive goes up and negative goes down. Testing Operations
Before running your first G-code file, configure the parameters to match your specific CNC router: 1. Motor Parameters (Pulse Equivalent) Right-click on Setup
Once installed, go to -> "Factory Parameter" (or "System Parameters"). Ensure your machine's specific kinematic parameters (pulse equivalents, soft limits, home settings) are correct. If this is an upgrade, import your saved .cfg or .par backup file immediately.
Ensure the computer is turned off. Install the card into a PCI slot, secure it, and turn the computer on. 2. Run the Installer Locate the NCStudio_v5.5.60-1_English_64bit.exe file. Right-click the file and select .
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. If you share with third parties
In the world of computer numerical control (CNC) machining, the bridge between your design software and your cutting tool is the controller. For legions of CNC router owners—particularly those with Chinese-manufactured machines—that bridge has a name: . Among the many iterations of this software, one version stands out for its stability, language accessibility, and compatibility with modern hardware: NCStudio V55601 English Setup 64-bit .
Check Device Manager to see if the card is recognized. If you do not have a card, ensure you are launching the software shortcut explicitly designated for "Simulation" or "Demo" mode. "Unbalanced Axis / Lost Steps"
Follow the prompts by clicking "Next" until the installation is complete. Power off and unplug your computer.
Standard V5 drivers are 32-bit. You will need the specific 64-bit driver translation layer or the updated Weihong 64-bit driver package.