Dt50 User Manual Pdf To Use Work !exclusive!: Dtape

Press and hold the button for two seconds. The device enters continuous scanning mode, clicking repeatedly. Sweep the laser slowly across your target area. The screen will dynamically display three values:

: Use the reference button to choose whether measurements start from the front edge or the rear edge of the device. Measuring from the rear is standard when placing the device against a wall. 2. Essential Measurement Modes

The optical sensor and laser lens are sensitive. Clean them gently with a damp microfiber cloth or camera lens wipe. Never use harsh chemical solvents.

Changes the measurement units (long press) or switches the reference point between the front and back of the device (short press). dtape dt50 user manual pdf to use work

The Dtape DT50 is a compact, handheld laser distance measurer designed for portability and ease of use. It is accurate to within ± 2mm (± 0.08 inches) and features a backlit LCD screen for viewing measurements in low-light conditions. 0.05 to 50 meters (0.16 ft to 164 ft). Accuracy: ± 2mm. Units: Meters, Inches, Feet. Battery: 2 x AAA batteries (usually included).

: Press the Unit button quickly to switch between measuring from the top (front) or bottom (rear) of the device. 📏 Measurement Modes

: The DT50 can store up to 20 sets of data automatically. Use the storage buttons to scroll through previous readings. Care & Maintenance DTAPE DT50 Laser Distance Meter User Manual - Manuals+ Press and hold the button for two seconds

You can toggle between meters, inches, and feet by holding the "Unit" button.

for water and dust resistance, making it suitable for damp or dirty construction sites. User Interface : Features a large, 4-line backlit LCD

The device processes the three dimensions and delivers the total cubic volume. Indirect Pythagorean Measurement The screen will dynamically display three values: :

The DTAPE DT50 does far more than point-and-shoot linear measurements. Below is how to use every built-in calculation mode for field work. Single Distance Measurement Press the button to turn on the laser beam. Aim the red laser dot at your target.

Before diving into the manual, it helps to understand what the DTape DT50 can do. The device replaces traditional tape measures with an accurate laser beam, boasting a measuring range of up to 165 feet (50 meters) with an accuracy of ±1/16 inch. Key features typically outlined in the user manual include:

Long-press the Unit button to cycle between meters, inches, and feet.