Dvb Select Type Error Samsung Tv [better] Jun 2026

The signal strength might be too low, requiring an antenna amplifier.

If the error appears while you are trying to set up channels, the issue may be related to your signal or regional settings. How to get the DVB notice off the tv screen.

A weak, corrupted, or noisy signal can confuse the DVB tuner hardware, triggering a software error.

If standard settings are locked, technicians often use the "Service Menu" (accessed by pressing while the TV is off) to reset the Region or Local Set parameters. Caution: Changing settings here can permanently disable the TV. dvb select type error samsung tv

The TV didn't respond. Wrong code. Newer models.

Press the Setup button, then enter the sequence above using the on-screen pad.

This comprehensive guide explains why this error happens and provides step-by-step instructions to resolve it. Understanding the Error The signal strength might be too low, requiring

Select this if your cable connects directly to a satellite dish. Allow the scan to reach 100% completion. 5. Update the TV Firmware

: The signal being fed into the TV does not match the DVB type selected in the settings. Step-by-Step Troubleshooting Manual Tuning & Signal Reset : Navigate to Settings > All Settings > Broadcasting . Select Expert Settings > Manual Scan .

| Region | Correct DVB Type | |--------------|------------------| | Europe, India, Africa, Australia | (terrestrial) or DVB-T2 | | UK | DVB-T/T2 | | South America| DVB-T (some ISDB-T) | | North America | ATSC (not DVB) → mismatch likely | A weak, corrupted, or noisy signal can confuse

⭐⭐☆☆☆ (Frustrating, but fixable) Applies to: Samsung Smart TVs (2016–2024 models, especially those with DVB-T2/C/S2 tuners)

A temporary software bug in the Tizen operating system is freezing the tuner module.

When your Samsung TV displays a "DVB Select Type Error," it means the television’s software cannot communicate with the tuner broadcast settings or the incoming signal profile does not match the configured region. This mismatch prevents the TV from processing the channel scan. Step 1: Change Your TV Source Settings