Factorysoft Opc Client Install [work] Here

This article walks through installing and configuring the FactorySoft OPC Client so you can connect to OPC servers, read/write tags, and troubleshoot common issues. Assumes Windows environment (FactorySoft products are typically Windows-based).

Launch the FactorySoft OPC Client. Click on the or File > New Connection menu. The client will automatically scan the local registry for registered OPC servers. Select your target server from the drop-down list (e.g., Kepware, RSLinx, Matrikon) and click Connect . 2. Connecting to a Remote Server

: Install the OPC Core Components (redistributables provided by the OPC Foundation) to ensure the necessary DLLs for DCOM/DA communication are present.

: Check that the user account running the FactorySoft client has permissions in the DCOM configuration of the OPC Server. factorysoft opc client install

Right-click the extracted setup file ( setup.exe or FactorySoftOPCClient.exe ) and select . If an "Unblock" checkbox appears at the bottom of the General tab, check it and click Apply . 3. Step-by-Step Installation Process

Once the progress bar reaches 100%, click . If prompted to restart your computer to finalize COM component registration, save all active work and allow the system to reboot. 4. Initial Configuration and Server Connection

Follow the on-screen prompts. Choose the default installation path unless your company policy requires otherwise. This article walks through installing and configuring the

| Problem | Likely Cause | Solution | |---------|--------------|----------| | “OPC Server not found” | OPC Core Components missing | Install from OPC Foundation | | Access denied (E_ACCESSDENIED) | DCOM permissions | Run dcomcnfg → give Anonymous/Everyone launch & activation rights | | Installer hangs | Antivirus blocking | Disable AV temporarily | | Cannot browse remote server | Firewall blocking DCOM (port 135) | Allow port 135 TCP in Windows Firewall | | “Class not registered” | 32‑vs‑64-bit mismatch | Use 32‑bit OPC Client for 32‑bit OPC servers |

Click to transfer the application binaries. Once the progress bar reaches 100%, click Finish . If prompted to restart your computer, save your work and allow the system to reboot to finalize driver registration. 4. Initial Configuration and Connecting to an OPC Server

| Parameter | Description | |-----------|-------------| | /quiet | No UI | | /norestart | Prevent automatic reboot | | /log | Saves install log | | INSTALL_TYPE=Complete | Full installation | | ADD_FIREWALL_RULES=1 | Auto‑configure Windows Firewall | Click on the or File > New Connection menu

: Check the "Quality" column. If it says "Good," your installation and connection are successful. Troubleshooting Tip: DCOM Errors

Find GUID in HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall

Before you begin the installation, ensure your system meets these basic requirements: Windows 7, 10, 11, or Windows Server.