© 2015 YSFlight Headquarters. All Rights Reserved. Terms of Service and Privacy Policy
You downloaded software meant for a different Satlink model (e.g., WS-6933 or WS-6980).
Adds new DVB-T2/C frequencies and removes defunct satellite TPs. User Interface Occasional minor bug fixes in menu navigation. Hardware Limit
: Once the update is complete, the device will usually reboot. It is highly recommended to perform a Factory Reset (System -> Factory Setting) after any firmware change to ensure all new settings are applied correctly. Troubleshooting Tips
Copy the downloaded firmware file directly to the root directory of the USB drive. Do not place it inside any folders. Step 2: Connect to the Meter Turn off the Satlink WS-6979. Satlink Ws-6979 Software Upgrade
The Satlink WS-6979 is a popular satellite finder device used by professionals and enthusiasts alike to align and configure satellite dishes. Like any electronic device, it requires periodic software upgrades to ensure optimal performance, fix bugs, and add new features. In this article, we will guide you through the process of upgrading the software of your Satlink WS-6979 device.
Set the Upgrade Mode to or Software depending on the menu prompts.
Interruption during a firmware flash is the most common cause of hardware failure. Always use the power adapter during an upgrade. Backup First: You downloaded software meant for a different Satlink
Locate the USB port on the side or bottom panel of the meter. Insert the prepared USB flash drive firmly into the port. Step 3: Navigate the System Menu Turn on the device and wait for the main menu to load.
Newer software optimizations allow the device to lock onto DVB-S2 and DVB-T2 signals faster and with greater stability.
Comprehensive Guide to the Satlink WS-6979 Software Upgrade The Satlink WS-6979 is a reliable HD satellite and terrestrial signal finder used by telecom technicians and DIY installers worldwide. Keeping its firmware updated ensures optimal performance, accurate signal readings, and compatibility with evolving broadcasting standards. This guide covers everything you need to know about executing a successful software upgrade. Why Upgrade Your Satlink WS-6979 Firmware? Hardware Limit : Once the update is complete,
This usually indicates a corrupted firmware file download. Redownload the file and try again with a different USB drive.
Locate the official .bin firmware file from an authorized Satlink distributor or reputable satellite forum. Copy the file directly to the root directory of your FAT32 USB drive. Do not place it inside any folders. Step 2: Insert the USB Drive
The biggest complaint regarding Satlink software upgrades is . Because
© 2015 YSFlight Headquarters. All Rights Reserved. Terms of Service and Privacy Policy