Simco Fmx002 Manual Top -

This is the most critical step. Static meters measure the potential difference between the sensor and ground.

If the charge fluctuates or you cannot see the screen, press the green button.

0 to ±1.49 kV (Low range); ±1.0 kV to ±22.0 kV (High range).

The Simco FMX-002 is engineered for portability and ease of use. Understanding its core capabilities is the first step toward effective static monitoring: simco fmx002 manual top

remains a reliable tool for non-contact measurement of surface voltages.

The Simco FMX-002 is a highly reliable, pocket-sized electrostatic fieldmeter used to locate and measure electrostatic charges. Whether you are troubleshooting static on a manufacturing line, auditing an ESD-safe workspace, or verifying the balance of ionizers, this compact device delivers precise, repeatable results.

allows users to locate problems and ensure compliance with ESD standards. This is the most critical step

The sensor is delicate; avoid dropping the unit.

Point the sensor at the target surface. Adjust the distance until the two LED light rings focus into a single point on the surface.

Move the meter closer or further away until the two red light beams merge into a single, focused circle on the target. Hold the meter completely still at this exact distance. Step 4: Read and Hold the Measurement Read the static voltage directly from the LCD screen. 0 to ±1

This article serves three purposes:

Resets the baseline reading to zero. Essential before every new test.