Vw Polo 6n Dashboard: Removal Updated _top_

Look through the newly opened gaps (cluster area, radio area, glovebox area) to locate the structural Torx or hex screws fastening the plastic dashboard skin to the metal reinforcing crash bar behind it. 2. Engine Bay Firewall Bolts (The Crucial Step)

Push the switch in, turn it slightly to the right, and pull it toward you to release the unit. Radio and HVAC:

You must remove the main gauge cluster and peripheral switches to access hidden structural screws. vw polo 6n dashboard removal updated

Unplug the wiring harnesses from the indicator and wiper stalks. Unscrew the small bolts holding the stalk assembly to the column and slide the assembly off. Step 2: Center Console and Trim Pieces

Carefully maneuver the entire assembly out through the passenger door. Look through the newly opened gaps (cluster area,

Unbolt the bracing brackets located behind the radio aperture that connect the dashboard to the central floor tunnel. Inside the Engine Bay (Plenum Chamber) Open the hood and remove the windshield wiper arms.

Ensure the front wheels of the car are perfectly straight. Use a 24mm socket to remove the central nut. Mark the position of the wheel splines relative to the column shaft using a marker pen. Pull the wheel straight off. Radio and HVAC: You must remove the main

Are you planning to replace any during this process? Share public link

Clearing the lower passenger area provides access to the main structural support bolts.

To pull the dashboard out, you must clear the area around the driver's seat.